Acta S.p.A. Group Exhibit Hydrogen + Fuel Cells, HANNOVER MESSE 2013 Topic: Acta Presents the Lowest Cost Renewable Energy Storage and Telecom Backup Power S…
Video Rating: 0 / 5
Acta Presents the Lowest Cost Renewable Energy Storage and Telecom Backup Power System
April 29, 2013 by ·
Advanced Circuitry Option for Thermoelectric Air Conditioner Now Enables Continuous, Maximum Cooling Regardless of Power Supply or Voltage Flow
March 6, 2013 by ·
Warminster, PA (PRWEB) March 05, 2013
EIC Solutions, Inc., a leading manufacturer of thermoelectric air conditioners, electronic enclosures and transit cases, has advanced the circuitry engineering in their cooling units to provide maximum cooling output regardless of available power supplies or the integrity of the voltage flow. EIC air conditioners run off either an AC or DC power source with consistently high power utilization efficiency. The EIC chip design also optimizes virtually any type of input power assuring high performance cooling even if voltage fluctuates.
In situations where only DC power is available, EIC air conditioners can be designed to operate on a wide range of DC voltages. This feature is very useful in mobile applications and in some military operations where only DC power is available. EIC units will even run off a 24V or 28V DC truck battery if that is the only power source available.
For AC power installations — either 90-132V or 180-264V — EIC offers an auto-range feature. The auto-range feature automatically tracks and optimizes available voltage to provide unimpeded cooling at rated BTUs even when the units are installed in areas where voltage flow may vary such as older buildings and production facilities. When connected to an AC power source, EIC units immediately convert the input to DC enabling the internal circuitry to optimize power consumption and utilization for maximum cooling efficiency. Some EIC units designed for maximizing versatility will operate on AC or DC voltage and will switch between 120/240 AC and 24/28 DC automatically based on available power connections.
“By making EIC cooling units compatible with basically any power source,” said Dave Bates, EIC Operations Manager, “we make highly efficient cooling and significant savings on energy and maintenance possible in practically any installation scenario.” Bates explained that thermoelectric cooling units have no compressor, refrigerant or filters, and there are no moving mechanical parts other than fans. “This is unique to thermoelectric cooling units,” said Bates who also pointed out that the absence of compressors and refrigerants results in almost zero maintenance.
EIC offers the ThermoTEC Series thermoelectric air conditioners, a complete line of compact, lightweight, solid-state thermoelectric coolers for cabinets and enclosures. The units feature a simple, efficient Peltier design for reliable performance without the use of CFCs. Peltier assemblies use thermoelectric modules sandwiched between high performance aluminum heat sinks and one or more high CFM axial fans. These assemblies are coupled with a patented EIC electronic design to pump the heat from the inside of an enclosure to the outside, without exposing delicate electronics to outside air or contaminates. A wide range of sizes is offered from 200 to 2500 BTU.
Made in the USA, EIC air conditioned electronic enclosures and transit cases protect controls, computers, cameras, telecom equipment and other electronic/electrical gear from particulate contaminants, oils, water and most other environmental hazards. The weather-tight units are built to NEMA standards and can be equipped with a cooling and heating system for total control over cabinet interior temperatures. Options include heaters, digital temperature controllers, rain shrouds, drip pans and tamper resistant packages. Enclosures may be fitted with mounting feet, drop-in rack mount brackets, insulation or a polycarbonate view window.
For more information about EIC thermoelectric air conditioners with multi-voltge capability please contact EIC Solutions, Inc. Phone: 215-443-5190. Fax: 215-443-9564. email: info(at)eicsolutions(dot)com.
About EIC Solutions, Inc.
EIC Solutions, Inc., is a leading global provider of cooling and protection solutions for electronics and equipment. Since 1988, EIC has specialized in the design and manufacture of thermoelectric cooling systems for a wide range of applications in many markets including industrial, commercial, military and defense, security and surveillance, oil and gas and infrastructure markets. EIC thermoelectric air conditioners, air conditioned enclosures and air conditioned transit cases meet application requirements for housing and cooling electronics and equipment — both stationary and mobile — in harsh indoor as well as outdoor environments. In addition to pre-packaged solutions, EIC can create custom engineered products designed to meet unique application needs. Flexible production capabilities enable EIC to provide standard and custom solutions for orders ranging from a single piece up to large-scale production rollouts. EIC’s customers include Fortune 100 companies, all branches of the military and government agencies.
ThermoTEC is a registered trademark of EIC Solutions, Inc., Warminster PA.
IBM Veteran & Power Systems Expert Joins Evolving Solutions
January 21, 2013 by ·
Minneapolis, MN (PRWEB) January 21, 2013
Evolving Solutions, a leading provider of datacenter infrastructure solutions, is pleased to announce that IBM Veteran and Power Systems expert, Tim Klubertanz, has joined Evolving Solutions as a Solution Architect.
Klubertanz comes to Evolving Solutions from IBM, where he spent the last 14 years of his career. He is widely recognized in the industry as an expert in IBM iSeries Power Systems and has designed and led many complex infrastructure deployments for small and large customers around the world.
“Tim is a significant hire for Evolving Solutions because of his worldwide expertise in IBM Power Systems,” said Jaime Gmach, President, Evolving Solutions. “Tim brings a combination of skills in server, storage, and virtualization that will further differentiate Evolving Solutions in the marketplace.”
IBM Power Systems technology is enabling more efficient and highly scalable IT architecture that provides exceptional business resiliency. Companies need efficient IT to support business critical applications.
“Having a dynamic IT infrastructure is all about selecting the right systems and software,” said Gmach. “With Tim onboard, we further establish our leadership position within the industry by delivering truly customized solutions that enable businesses to move with agility and speed.”
Klubertanz offers a requirements-based approach to solution design and has deep skills in a wide range of technologies allowing him to effectively lead discussions with people at any level. He has experience in many industries as well as the complete solution life-cycle.
For more information about customized IT solutions, visit evolvingsol.com.
About Evolving Solutions
Evolving Solutions is a systems integration and data center management firm that works with IT departments to solve key business issues. Through strategic partnerships with industry leading technology manufacturers, Evolving Solutions is able to offer best-of breed technology infrastructure solutions that ensure business continuity and disaster recovery throughout the entire technology lifecycle.
http://www.evolvingsol.com
Decatur Self Storage Adds Solar Power to Historical Georgia Facility
January 16, 2013 by ·
Decatur Self Storage Adds Solar Power to Historical Georgia Facility
Decatur Self Storage in Decatur, Ga., has added enough solar panels to its facility to provide more than 100 percent of its electricity needs. Radiance Solar, an Atlanta-based contractor specializing in the design, installation and maintenance of solar …
Read more on Inside Self-Storage
SIMPLY SELF STORAGE NOTICE OF PUBLIC SALE
SS MNRI, LLC, doing business as Simply Self Storage intends to enforce its lien on certain personal property belonging to the following, at the facility. The sale will take place (unless otherwise withdrawn) on Wednesday, February 6th 2013 on or after …
Read more on Woodbury Bulletin
San Diego Bay: Single Implosion Slated for South Bay Power Plant
September 1, 2012 by ·
CHULA VISTA, Calif. (PRWEB) August 31, 2012
Dynegy South Bay, LLC, has submitted a minor amendment to its Coastal Development Permit for the demolition of the South Bay Power Plant to the California Coastal Commission.
The terms of the amended permit include one implosion rather than the previously approved two-phased implosion of the power plant’s above-ground structures.
“The City of Chula Vista supports Dynegy South Bay’s decision to amend its Coastal Development Permit,” said Chula Vista Mayor Cheryl Cox. “Demolishing the power plant with a single implosion will expedite creation of an unobstructed view corridor for the residents of Chula Vista and moves us closer to creating a world-class resort and residential destination on our portion of San Diego Bay as outlined in the Chula Vista Bayfront Master Plan.”
The original permit had been approved by the California Coastal Commission on June 14, 2012. The permit entailed demolishing the plant’s boiler structures using a two-phased implosion. The new implosion procedure will remove the visual blight of the above-ground structures in a single incident.
Dynegy South Bay, LLC, the former operator of the plant, and its contractor for the demolition project, Silverado Contractors, Inc., determined that a single implosion would minimize impacts to the surrounding community. Noise levels would be reduced, the need to re-route traffic in the immediate area would be lessened and the demolition schedule would be shortened by approximately two months.
Dynegy South Bay will outline a revised demolition timeline to reflect the single implosion event. Dismantling and salvage activities will continue to proceed as scheduled. Silverado Contractors, Inc. has been removing equipment such as piping, lights, controls, duct work and tanks. Warehouses, storage buildings, tanks and other ancillary equipment are being removed using heavy equipment.
“The Port of San Diego and the City of Chula Vista’s goal has always been to remove the South Bay Power Plant swiftly and safely,” said Ann Moore, Vice Chair of the Board of Port Commissioners and the City of Chula Vista’s representative on the Board. “We believe the amended project will achieve that result, allowing plans for a redeveloped and improved waterfront to come to fruition.”
The project is expected to generate about 21,000 tons of recyclable metals, including iron, steel, aluminum and copper. It may also generate up to 3,400 tons of other non-hazardous waste, such as wood or plastic, which will be recycled as feasible.
About the Port:
The Port of San Diego is the fourth largest of the 11 ports in California. It was created by the state legislature in 1962. Since then, it has invested millions of dollars in public improvements in its five member cities of Chula Vista, Coronado, Imperial Beach, National City and San Diego.
The port oversees two maritime cargo terminals, two cruise ship terminals, 17 public parks, the Harbor Police Department and the leases of more than 600 tenant and sub tenant businesses around San Diego Bay.
The Port of San Diego is an economic engine, an environmental steward of San Diego Bay and the surrounding tidelands, and a provider of community services and public safety.
About the Chula Vista Bayfront Master Plan
At 556 acres, the Chula Vista Bayfront Master Plan (CVBMP) will transform Chula Vista’s underused industrial bayfront landscape into a thriving residential and world-class waterfront resort destination. The Plan will establish thousands of new jobs, create new public parks, protect natural coastal resources, provide conference and visitor-serving amenities and build an important asset for the San Diego region, the South Bay, Chula Vista residents and coastal visitors. The CVBMP is the result of a decade-long joint planning effort by a broad coalition of stakeholders, the Port of San Diego, the City of Chula Vista and Pacifica Companies. The Plan represents the last significant development opportunity in Southern California and is anticipated to be considered by the California Coastal Commission in summer 2012.
Power Target LLC Announces Launch of Publisher Recruitment Program
February 29, 2012 by ·
Baltimore, Maryland. (PRWEB) February 29, 2012
To coincide with LeadsCon 2012, Power Target LLC today announces the launch of its Publisher Recruitment Program poised to vastly improve the selection process for those benefitting from electricity de-regulation.
According to many, the de-regulation of electricity providers is a good thing. However, while open competition offers customers greater choice, it also presents a challenge. The challenge comes to the consumers who need to learn exactly what de-regulation means for them, how to choose a provider, how to switch providers and how to know they are getting the best deal. Suppliers also struggle as they must educate new markets while driving new customers efficiently and at scale.
Power Target has set out to make de-regulation more understandable, easier to take advantage of and more beneficial to both the consumer and suppliers.
Power Target is not a comparison site; it is a backend platform that is integrated into dozens of sites. In essence, Power Target is a cloud based solution that allows electricity providers to own the customer experience. It was designed specifically for competitive energy markets and brings together the best publishers and the retail electricity suppliers looking to scale.
This platform enables consumers to find and compare the best electricity packages in their area. But it also, uniquely, allows electricity companies to communicate with potential customers and tell them more about their company than just their rates.
With this platform, electricity companies can make sure that customers see what makes their company unique; they can inform them of their loyalty or incentive programs, their customer service, their green credentials, industry awards or community support schemes.
With most comparison sites, dozens of quotes are displayed, often including many from the same company which makes it hard for customers to accurately compare suppliers and prices.
Power Target does things differently; customers enter their zip code, select their service area, and see the different brands available in their area. It is a much cleaner, but also a fairer model, allowing customers to choose companies based on their credentials and core values, as well as their rates.
Power Target already powers leading websites such as http://electricityrates.com/, http://compareelectricity.com/, and http://renewableelectricity.com/.
Taking their offering to the worlds stage, Power Target is hosting a both at LeadsCon 2012 in Las Vegas on the 28th and 29th of this month. During the event the company will be actively looking to expand their network of publishers in the electricity shoppers, movers and local niche verticals.
The intiative is being officially launched at the event as the Publisher Recruitment Program.
Those interested in signing up are advised to visit Power Targets Leadscon Booth.
For more information on Power Target, to explore their unique interface and to find out more about the advantages to retail electricity suppliers, please visit: http://www.powertargetllc.com
About Power Target LLC
Power Target LLC is a Baltimore, Maryland based firm that has developed a revolutionary cloud based platform for connecting retail electricity shoppers with consumers. The flexibility of their platform, proprietary media properties, and distribution network open audiences Retail Energy Providers would not otherwise be able to reach. All pricing is performance based and setup/integration with the platform is simple for both electricity suppliers and publishers. For more information, visit http://www.powertargetllc.com
###
Find More Mover Service Press Releases
Solar Power Assisted car transport ship
February 28, 2012 by ·
Toyota believes in sustainable development and makes the environment a top priority. To that end, Toyota partnered with a shipping company (NYK) that transports its vehicles from Japan to the US with a transport carrier first. The worlds first solar-power-assisted car carrier, the Auriga Leader, is outfitted with 328 solar panels that can generate up to 40 kilowatts. Learn more about the 60000-ton vessel. The vessels maiden voyage occurred in June and onboard was 2507 Toyota, Lexus and Scion vehicles destined for the Port of Long Beach, CA.
Video Rating: 0 / 5
www.automove.com.au Do you need car or vehicle transport? Never had to use car transportation services before and not sure where to start or who are reputable car transport companies? If so, Compare Quotes can help- we offer the expert knowledge and assistance you need when it comes to car transportation and quality, cheap car transport. We can help you organise local or interstate car transport with some of Australia’s most reliable and experienced car movers and car shipping specialists. Not only will you get great quotes from a number of car transporters but you’ll also enjoy the peace of mind of having shopped around for the best car transporter without enduring the time consuming process! www.automove.com.au 1800 992 772
Video Rating: 5 / 5
6 IN 1 Solar Power Moving Dog Car Airboat Robot DIY Toy Kit Teaching Gadget
February 22, 2012 by ·
Most popular DIY Moving eBay auctions:
Making Things Move DIY Mechanisms for Inventors, Hobbyists, and Artists by...
 | US $20.68 End Date: Saturday May-18-2013 16:05:52 PDT Buy It Now for only: US $20.68 Buy it now | Add to watch list |
Recent Comments