Enhanced Oil Recovery Market – New Industry Research Report is Now Available for Pre-Order at Transparency Market Research


Albany, New York (PRWEB) April 26, 2013

Enhanced oil recovery (EOR) is a term for the techniques used for boosting oil recovery by injecting chemicals, gas, or steam to force more oil from an aged field. EOR is also called tertiary recovery or improved oil recovery. On an average, 70% to 75% of the oil remains trapped in reservoirs because it is too difficult to extract, so by using EOR, about 30 to 60% of the reservoir’s original oil can be extracted. EOR has the capability to increase oil recovery up to 75%, although it is expensive to use in an oil field.

Currently, three methods of EOR are used – gas injection, thermal recovery, and miscible solvents. But all the reservoirs cannot use EOR methods for production due to the higher cost of development. So these reservoirs must be heavily evaluated to determine which type of EOR will work best on the reservoir.

Related Report : Mining Equipment Market

http://www.transparencymarketresearch.com/mining-equipment.html

Thermal (Steam):

A steam injection heats the oil inside the reservoir which helps it flow easily through the fractures to the production wells. Along with maximum possible oil recovery, the thermal recovery method is accompanied by high capital expenditures as well as high operating cost and is therefore risky. A steam injection into the reservoir raises recovery from 3-5% to 25-35%. The best thermal production techniques which are used currently are: steam assisted gravity drainage, cyclic steam stimulation, steam flood, and in-situ combustion. In 2011 some advanced projects started in Oman and California, which used solar energy to produce steam. It is estimated that over 50% of applied EOR in the United States is done by thermal recovery.

Gas Injection:

Gas injection for EOR involves injecting nitrogen, carbon dioxide, or natural gas into the reservoir among which the carbon dioxide-EOR method is gaining the most popularity. Gas injection EOR involves injecting the miscible gas into a reservoir which creates an easy flowing mixture which flows to production wells from the reservoir. Injecting gas into the fractures raises the recovery of oil from the field from 10% to 45-50%.

Related Report : Fuel Cells Market

http://www.transparencymarketresearch.com/fuel-cell-market.html

Chemical Injection:

Chemical EOR introduces a polymer into the reservoir to improve the effectiveness of surfactants, which helps lower the surface tension that holds back the flow of crude oil through the well. This method includes surfactant flooding (including foam) polymer displacement, alkaline displacement, acid displacement, chemical reagents displacement, and microbiological treatment. It is estimated that injection of chemical into the reservoirs increases the oil recovery from 15 % to 25%.

The use of this method is limited because of the expensive chemicals needed, impact on the environment, and less proven records of success of this method. With the application of this method, the recovery of oil from the field sees an increase of 15 % to25%.

The market is showing growth since 2005 because of government interest and investment in new technologies as the increase in oil production will fuel the economy and use of CO2 will help reduce the industrial CO2 emissions. It is estimated that more than 130 billion tons of carbon dioxide could be captured by CO2-EOR on a global scale. The current total oil production is approximately 700 million barrels which is expected to grow almost 10 times by 2020 which will boost the revenue by around 14 times in the next 8-10 years.

Related Report : Coal Bed Methane Market

http://www.transparencymarketresearch.com/coal-bed-methane-market.html

There is an increase in the use of gas-EOR by oil industries in America, Asia-Pacific, and in other countries because the companies with carbon capture and storage technologies can market their carbon dioxide to oil industries, which also helps them to reduce greenhouse gases and receive possible tax breaks or government grants.

This research report analyzes this market depending on its market segments, major geographies, and current market trends. Geographies analyzed under this research report include:

North America

Asia Pacific

Europe

Rest of the World

This report provides comprehensive analysis of

Market growth drivers

Factors limiting market growth

Current market trends

Market structure

Market projections for upcoming years

This report is a complete study of current trends in the market, industry growth drivers, and restraints. It provides market projections for the coming years. It includes analysis of recent developments in technology, Porters five force model analysis and detailed profiles of top industry players. The report also includes a review of micro and macro factors essential for the existing market players and new entrants along with detailed value chain analysis.

Browse Report with Request TOC : http://www.transparencymarketresearch.com/enhanced-oil-recovery.html

Reasons for Buying this Report

This report provides pinpoint analysis for changing competitive dynamics

It provides a forward looking perspective on different factors driving or restraining market growth

It provides a technological growth map over time to understand the industry growth rate

It provides a seven-year forecast assessed on the basis of how the market is predicted to grow

It helps in understanding the key product segments and their future

It provides pinpoint analysis of changing competition dynamics and keeps you ahead of competitors

It helps in making informed business decisions by having complete insights of market and by making in-depth analysis of market segments

It provides distinctive graphics and exemplified SWOT analysis of major market segments

Browse All Market Research Reports : http://www.transparencymarketresearch.com/







Related Storage Cost Press Releases

Clothing Wholesaling in Australia Industry Market Research Report Now Updated by IBISWorld


Melbourne, Australia (PRWEB) April 04, 2013

Over the five years through 2012-13, industry revenue is expected to decline at an annualised rate of 2.7% to reach $ 8.91 billion, capped off by a 0.5% decline in 2012-13. As the global reach of many companies around the world increases, wholesale bypass is becoming increasingly prevalent in the industry. Low-cost producers such as China and Vietnam are becoming more approachable by retailers, allowing them to sell products directly to retailers and eliminate wholesalers in the process.

The Clothing Wholesaling industry’s weak performance can also be attributed to low underlying demand from the retail sector. According to IBISWorld industry analyst Ricky Willianto, the rise of online clothing stores has undermined the demand for products sold through retail channels, which in turn undercut retailers’ demand for products sold through wholesalers.

Although clothing manufacturers have been able to produce and sell at lower costs, profit margins in the Clothing Wholesaling industry have declined. The struggling retail sector has forced wholesalers to offer lower prices to retailers, which make up a large portion of the downstream market, eliminating any profit that would have been generated by lower purchase costs. Despite this, wholesalers are finally catching up to the online shopping fever by setting up online stores and allowing consumers to directly purchase items from them, says Willianto. By bypassing retailers, wholesalers are able to generate fatter profit margins.

The industry’s future is rather bland, with industry revenue forecast to grow marginally. The forecast revenue growth is below the growth rate expected for the overall economy, highlighting the declining nature of the industry. Rising household spending and wage growth will boost demand for clothing, although the destiny of the Clothing Wholesaling industry depends on how it responds to growth in the online segment.

The industry has a low level of concentration. The industrys largest operator is Pacific Brands Limited.

For more information, visit IBISWorlds Clothing Wholesaling report in Australia industry page.

Follow IBISWorld on Twitter: http://twitter.com/#!/ibisworldau

IBISWorld Industry Report Key Topics

Companies in the industry wholesale clothing. Companies purchase clothing and then sell the garments to retailers, generally with minimum or no further development of the items. Most wholesalers in the industry undertake sales and administrative activities, such as establishing relationships with manufacturers and retailers to ensure the reliable supply and demand of stock, marketing and advertising their products, and storage and transportation of stock.

Industry Performance

Executive Summary

Key External Drivers

Current Performance

Industry Outlook

Industry Life Cycle

Products & Markets

Supply Chain

Products & Services

Major Markets

International Trade

Business Locations

Competitive Landscape

Market Share Concentration

Key Success Factors

Cost Structure Benchmarks

Basis of Competition

Barriers to Entry

Industry Globalisation

Major Companies

Operating Conditions

Capital Intensity

Technology & Systems

Revenue Volatility

Regulation & Policy

Industry Assistance

Key Statistics

Industry Data

Annual Change

Key Ratios

About IBISWorld Inc.

Recognised as the nations most trusted independent source of industry and market research, IBISWorld offers a comprehensive database of unique information and analysis on every Australian industry. With an extensive online portfolio, valued for its depth and scope, the company equips clients with the insight necessary to make better business decisions. Headquartered in Melbourne, IBISWorld serves a range of business, professional service and government organisations through more than 10 locations worldwide. For more information, visit http://www.ibisworld.com.au or call (03) 9655 3886.







Related Business Storage Press Releases

techreport.com – The Tech Report Podcast – Enhanced Feed


techreport.com – The Tech Report Podcast – Enhanced Feed

from The Tech Report Podcast – Enhanced Feed

Price: USD 0
View Details about techreport.com

Portable Office Buildings Serve Many Purposes According to New MobileOfficeQuotes Report

Troy, MI (PRWEB) January 06, 2013

A new portable office buildings report published by MobileOfficeQuotes.com has found that todays portable office buildings service many different purposes, including providing comfortable, professional looking space for businesses, schools and hospitals. In the new report, now available at MobileOfficeQuotes.com, customers can learn more about how portable office buildings work, including how they can be used to quickly expand a workspace with minimal investment. Tyler Smith, MobileOfficeQuotes.com spokesman said, Portable office buildings have become increasingly popular in recent years, as many businesses and organizations are looking for ways to expand their space without having to build from scratch or throw money away on renting a space. Utilizing portable office buildings is the easiest way to get more space that can be customized specifically to meet your needs without going over budget.

As noted in the new portable office buildings report published by MobileOfficeQuotes.com, portable office trailers are the only completely mobile office solution that complies with state and national building, merchant, electrical and plumbing codes. Smith said, When you need extra space fast and you dont have the budget to start from scratch, portable office buildings provide just the amount of space you need, with convenient ordering and delivery options that can get you up and running in no time.

The expert staff at MobileOfficeQuotes.com is trained to provide competitive quotes for homes and businesses that are looking to expand their physical space with a steel building or modular building that is delivered right to their property. The services are designed to be easy to use, providing fast delivery and quick set up to get churches, businesses and schools up and running in no time.

Since 2010, Mobileofficequotes.com has been the leading quote provider for mobile office rentals, storage containers, steel buildings and modular buildings. Dedicated to providing the highest level of service, customers can request free quotes online by submitting their contact information, along with a short online form, at Mobileofficequotes.com.







Find More Rent Storage Space Press Releases

Rail Transportation in the US Industry Market Research Report from IBISWorld has Been Updated


Los Angeles, CA (PRWEB) January 12, 2013

The Rail Transportation industry is vital to the US economy, moving people and goods to different places around the country. In recent years, the industry has been revitalized, mostly due to rail’s cost-effectiveness and fuel efficiency compared with other forms of transportation. Despite signs of a troubled economy, revenue rose in 2007 and 2008, says IBISWorld industry analyst Lauren Setar. Rising fuel prices made rail transportation a better alternative for shipping. Operators increased fuel surcharges, boosting industry revenue. As the recession hit in 2009 and fuel prices fell, however, revenue dropped 20.2% due to slowing demand for transporting goods and raw materials. A rebound in fuel prices and growing consumer spending is expected to result in a 1.1% revenue increase over 2012. Despite this recovery, the dramatic decline in 2009 limited the industry’s five-year growth. IBISWorld estimates that revenue grew at an average annual rate of 0.7% to $ 78.2 billion over the five years to 2012. Meanwhile, profit contracted because freight volumes and rates fell in response to uncertainty.

Many types of freight are transported by rail, including raw materials, consumer goods and people. Coal used for generating electricity is the most common freight that trains carry, accounting for 45.0% of all carloads. Each of the four largest Class 1 railroads carries a significant amount of coal freight. The only Class 1 railroad that offers nationwide passenger services is Amtrak, which is owned and subsidized by the federal government. Class 1 railroads account for nearly 86.5% of industry revenue; this dominance has caused long-term consolidation as larger players acquire smaller ones to gain access to new routes. In the five years to 2012, the number of Rail Transportation industry firms is expected to decline an average 1.3% annually to 502. The high capital costs of establishing new railroads and the need for extensive operations to be close to a large number of consumer markets has limited the entry of new players into the market, adds Setar. Furthermore, relatively low profit margins and increased competition from other transportation mediums resulted in numerous mergers among Class 1 railroads in the 1980s and 1990s. The industry has experienced a large number of mergers and acquisitions over the five years to 2012. One of the industrys major players, Burlington Northern Santa Fe Corporation, became a subsidiary of Berkshire Hathaway in February 2010.

As the economy recovers, manufacturing production will pick up and consumers will begin to spend more, driving demand for industry transportation services. Furthermore, rising fuel costs will cause rail transportation to be comparatively cost-efficient for businesses that require bulk freight. At the same time, profit is expected to increase due to capital improvements made over the past five years. Consequently, in the five years to 2017, IBISWorld projects that industry revenue will increase. For more information, visit IBISWorlds Rail Transportation in the US industry report page.

Follow IBISWorld on Twitter: https://twitter.com/#!/IBISWorld

Friend IBISWorld on Facebook: http://www.facebook.com/pages/IBISWorld/121347533189

IBISWorld industry Report Key Topics

The Rail Transportation industry comprises companies that operate railroads across the United States. This includes large railroads (Class 1 railroads) and regional and local line-haul railroads that carry freight and passengers. This industry does not include scenic and sightseeing rail transportation, street railroads, commuter rail or rapid transit.

Industry Performance

Executive Summary

Key External Drivers

Current Performance

Industry Outlook

Industry Life Cycle

Products & Markets

Supply Chain

Products & Services

Major Markets

Globalization & Trade

Business Locations

Competitive Landscape

Market Share Concentration

Key Success Factors

Cost Structure Benchmarks

Barriers to Entry

Major Companies

Operating Conditions

Capital Intensity

Key Statistics

Industry Data

Annual Change

Key Ratios

About IBISWorld Inc.

Recognized as the nations most trusted independent source of industry and market research, IBISWorld offers a comprehensive database of unique information and analysis on every US industry. With an extensive online portfolio, valued for its depth and scope, the company equips clients with the insight necessary to make better business decisions. Headquartered in Los Angeles, IBISWorld serves a range of business, professional service and government organizations through more than 10 locations worldwide. For more information, visit http://www.ibisworld.com or call 1-800-330-3772.







Strong Industrial Growth in Developing Countries Drives the Global Compressors and Vacuum Pumps Market, According to New Report by Global Industry Analysts, Inc.

San Jose, CA (PRWEB) October 08, 2012

Follow us on LinkedIn Compressors and vacuum pumps are indispensable powerful tools for modern industrial businesses. From powering equipment, machinery and power tools, to providing an emergency air supply system, compressors and vacuum pumps find ubiquitous applications in improving industrial processes in todays modern world of technology. The market is characterized by cyclical demand patterns and technological innovations triggered by the competitive need to make quality enhancements.

Demand for compressors and vacuum pumps, which took a hurting blow during the 2007-2009 world economic recession, recovered in the years 2010 & 2011, triggered primarily by end-users stepping-up their budgetary outlays for innovative and specialized vacuum pump technologies. The period also witnessed increased demand for dry vacuum pumps in line with the growing concerns over process contamination during manufacturing of semiconductors, electronics, and chemical products. Other factors that encouraged growth during the period were resurgence in investments and rebound in production activities. Improving economic conditions additionally unleashed pent-up demand as hitherto postponed purchase decisions resurged to provide commercial opportunities.

With tough economic conditions being touted as the new normal, especially among the developed economies, which are now saddled with conditions likely to persist into the foreseeable future, consumers in key end-user markets will continue to make cautious capital investments. In other words, the fundamental structural change underway in the developed economies and the ensuing era of depressed GDP growth, federal austerity measures, capital raising constraints, and increased taxes will compel companies to do more with less and run leaner, meaner, more efficiently and cost effectively. Against this backdrop, increased focus will be shed on cost-effective and energy efficient compressor and vacuum pump solutions. Energy efficient vacuum pumps will witness especially wide adoption in the semiconductor end-use industry, given the fact that vacuum pumps represent as much as 25% of total fab energy consumption. With stricter environmental legislations being implemented and the rising cost of actions/activities that increase greenhouse gas emissions, companies will focus on greener solutions that help bring down the cost of environmental compliance.

For a market which pins future growth prospects on medium to long term health of the economy, the periodic flaring up of Europes financial problems is currently throwing the European compressor and vacuum pump market into a state of sustained uncertainty. With Europe now engulfed in a crisis of confidence, the scenario in itself is dragging down growth patterns. The aggressive de-leveraging of European banks as indicated by the slowdown in credit growth and the austerity measures being implemented already triggered volatility in domestic demand and industrial output in 2011. The year witnessed EUs industrial sentiment being torn between optimism and fear, as a result of the mixed signals which emanated from the volatile manufacturing data in Spain and Italy and the encouraging industrial performance in Germany. The European debt crisis and its induced volatility in the Index of Industrial Production (IIP), not surprisingly leaves the compressors and vacuum pumps market nervous over the future playout of the crisis. With numerous factors still continuing to threaten capital expenditure in manufacturing industries in debt affected economies, demand growth for compressors and vacuum pumps in the region is treading the tight rope.

Developing markets in Latin America, Asia, Africa and the Middle East are forecast to rise over the horizon as important regions driving future growth. Higher levels of industrialization, and resultant spike in manufacturing activities including petroleum, mining, food, electronics, construction, are triggering growth in these markets. Over the last decade, the BRIC (Brazil, Russia, India and China) countries emerged into the spotlight as the next group of emerging economies with the potential to offset the diminishing power of advanced economies. However, vigorous ferreting of opportunities in these markets have diminished the potential for manufacturers to achieve first mover advantages. The last decade of booming growth in BRIC countries have also resulted in these countries becoming more interconnected by trade to the developed economies and thus tend to mirror the slowdown effects of the developed economies. The future is now poised to witness a new group of countries rise to center stage as the next generation of tiger economies that are characterized by rapidly growing domestic consumption, rising middle class, cheap labor, and favorable demographics. Given the subtle shift in geopolitical power and standard of living from West to East, its opportunities galore in the CIVETS (comprising Colombia, Indonesia, Vietnam, Egypt, Turkey and South Africa) region.

As stated by the new market research report on Compressors and Vacuum Pumps, the US represents the largest regional market. Asia-Pacific remains the fastest growing regional market waxing at a CAGR of about 6.0% over the analysis period. Compressors market represents the largest product segment accounting for a lions of global dollar sales.

Key players in the global market include Agilent Technologies Inc., ATLAS COPCO AB, Bristol Compressors International, Inc., Busch, LLC, Edwards Limited, Embraco SA, Emerson Climate Technologies, Inc., Gardner Denver, Inc., Ingersoll-Rand Plc, Kaeser Kompressoren GmbH, Oerlikon Leybold Vacuum GmbH, Pfeiffer Vacuum GmbH, PIAB AB, Sanden Corporation, Sundyne Corporation, Tecumseh Products Company, and Toyota Industries Corporation, among others.

The research report titled Compressors and Vacuum Pumps: A Global Strategic Business Report announced by Global Industry Analysts, provides a comprehensive review of industry overview, market trends, issues, drivers, company profiles, mergers, acquisitions and other strategic industry activities. The study provides market estimates and projections in (US$ ) for major geographic markets such as US, Canada, Japan, Europe (France, Germany, Italy, UK, Spain, Russia and Rest of Europe), Asia-Pacific, Middle East and Latin America. Product markets analyzed include Compressors (Positive Displacement Compressors and Dynamic Compressors) and Vacuum Pumps (Rotary Vacuum Pumps, Liquid Ring Vacuum Pumps, Diaphragm Vacuum Pumps, Diffusion Vacuum Pumps, Cryogenic Vacuum Pumps and Turbomolecular Vacuum Pumps).

For more details about this comprehensive market research report, please visit

http://www.strategyr.com/Compressors_and_Vacuum_Pumps_Market_Report.asp

About Global Industry Analysts, Inc.

Global Industry Analysts, Inc., (GIA) is a leading publisher of off-the-shelf market research. Founded in 1987, the company currently employs over 800 people worldwide. Annually, GIA publishes more than 1300 full-scale research reports and analyzes 40,000+ market and technology trends while monitoring more than 126,000 Companies worldwide. Serving over 9500 clients in 27 countries, GIA is recognized today, as one of the world’s largest and reputed market research firms.

Follow us on LinkedIn

Global Industry Analysts, Inc.

Telephone: 408-528-9966

Fax: 408-528-9977

Email: press(at)StrategyR(dot)com

Web Site: http://www.StrategyR.com/

###







More Cheap Movers Press Releases

Forklift Manufacturing in the US Industry Market Research Report Now Available from IBISWorld


Los Angeles, CA (PRWEB) December 06, 2012

Following years of strong growth, the Forklift Manufacturing industry faced tremendous challenges during the economic downturn. The Great Recession left the industry’s major downstream manufacturing and construction markets reeling, as consumer spending dropped and credit markets froze. With US manufacturing output slowed and many construction projects delayed or placed on the chopping block, industry demand plummeted, causing revenue to fall 7.8% in 2008 and an additional 16.2% in 2009. Conditions improved dramatically in 2010 and 2011, as the US manufacturing sector returned to growth in line with rising consumer spending, says IBISWorld industry analyst Sean Windle. In addition, strong demand from overseas markets helped offset painful losses during the recession. Despite recent upticks, industry revenue is expected to grow only 0.9% over 2012 to $ 9.2 billion, marking an annualized decline of 2.0% over the past five years.

Following mostly weak demand from the recession and a significant increase in raw-material prices, profitability has declined over the past five years, falling from 19.8% in 2007 to an estimated 18.5% in 2012. The main culprit for higher raw-material expenses is steel prices, which have risen at an annualized rate of 2.6% over the past five years. According to Windle, these factors also led to a drop in industry participation, as many forklift manufacturers were forced to exit the industry under mounting pressure from weakened demand and constrained margins. Fortunately for the industry, a brighter picture is set to emerge for US forklift manufactures over the next five years. On the back of stronger demand from downstream manufacturing industries and a recovering construction sector, industry revenue is forecast to increase through 2017.

Concentration in the Forklift Manufacturing industry is medium. In 2012, the top-three companies are expected to account for an estimated 42.5% of total industry revenue. The remainder of the market is split among many small and mid-size operators that produce parts and related equipment on a local or regional basis. Concentration is expected to increase marginally during the coming five years, as the number of companies is expected to fall at an annualized rate of 0.7% and total an estimated 476 firms by 2017. The specialized nature of forklift manufacturing limits the opportunities for consolidation, but merger and acquisition activity is likely to occur as larger companies seek greater vertical integration and operational efficiencies through the purchase of smaller parts suppliers. For more information, visit IBISWorlds Forklift Manufacturing in the US industry report page.

Follow IBISWorld on Twitter: https://twitter.com/#!/IBISWorld

Friend IBISWorld on Facebook: http://www.facebook.com/pages/IBISWorld/121347533189

IBISWorld industry Report Key Topics

Companies in this industry primarily manufacture forklifts, which are also known as industrial trucks. Forklifts include truck-type and hand-type pallet movers, skid jacks, portable stackers, straddle carriers, bomb lifts and loading and engine hoists. The manufacture of parts and attachments is included, but revenue from manufacturer-provided services is excluded.

Industry Performance

Executive Summary

Key External Drivers

Current Performance

Industry Outlook

Industry Life Cycle

Products & Markets

Supply Chain

Products & Services

Major Markets

Globalization & Trade

Business Locations

Competitive Landscape

Market Share Concentration

Key Success Factors

Cost Structure Benchmarks

Barriers to Entry

Major Companies

Operating Conditions

Capital Intensity

Key Statistics

Industry Data

Annual Change

Key Ratios

About IBISWorld Inc.

Recognized as the nations most trusted independent source of industry and market research, IBISWorld offers a comprehensive database of unique information and analysis on every US industry. With an extensive online portfolio, valued for its depth and scope, the company equips clients with the insight necessary to make better business decisions. Headquartered in Los Angeles, IBISWorld serves a range of business, professional service and government organizations through more than 10 locations worldwide. For more information, visit http://www.ibisworld.com or call 1-800-330-3772.







More Professional Movers Press Releases

New Report Global 3D Technology Market (2011 2016) by MarketsandMarkets


(PRWEB) June 16, 2012

According to a new market research report, Three-Dimensional Technology Market (2011 2016) by Products (3D IC, 3D Printer, 3D Display HMD, 3D Smartphone, 3D TV, 3D Digital Signage), Applications (3D Animation, 3D Printing, 3D Medical Imaging, 3D CAD, 3D Gaming, 3D Cinema) & Technology (Stereoscopy, Auto-Stereoscopy, Volumetric) Focus, Global Forecast & Analysis Features Introduction to 4D Technology published by MarketsandMarkets (http://www.marketsandmarkets.com), the total market is expected to reach $ 227.27 billion by 2016, at a CAGR of 15.81%.

Browse 84 tables and in-depth TOC on Three-Dimensional (3D) Technology Market (2011 2016) by Products, Applications & Technology, Global Forecast & Analysis Features Introduction to 4D Technology.

http://www.marketsandmarkets.com/Market-Reports/3d-4d-technology-market-646.html

Early buyers will receive 10% customization of reports.

Three-dimension (3D) technology has created the buzz in the market in the recent past, especially in the field of entertainment. Post the success of James Camerons Avatar, cinema lover is expecting more movies in 3D. 3D cinema is the most hyped field, in the 3D technology market. Movie producers and marketers are seeing 3D movies as a value-added product to generate additional revenue.

In current scenario, gaming and animation companies are giving lot of importance to the 3D technology, as 3D is becoming mainstream, more, and more of a norm. Also, 3D Animation and gaming forms the largest percentage share in overall 3D technology market.

Since the wave of 3D cinema, 3D TV has garnered consumers attention. With exciting features and competitive pricing, 3D TV is gaining shelf pace and consumer aspirations. Consumer electronics companies are constantly working on the pricing and 3D content, to attract more consumers.

Almost all major players have launched their 3D TV sets in stereoscopic display, in which viewer can view 3D content with the help of 3D glasses. Companies are offering 3D active shutter and passive polarized glasses to view the 3D content. Autostereoscopy will be the next big display type in 3D technology market. In this display technique, users dont need to wear 3D glasses. Gaming companies, signage-making companies have started using autostereoscopic display in their products. Although still in R&D stage, Autostereoscopy is going to be next big thing in 3D display technology.

Global 3D technology-products and applications market is expected to reach $ 227.27 billion by 2016, at an estimated CAGR of 15.81%. North America is holding a leadership position in total 3D technology market followed by Europe and APAC. In ROW market; Middle East and Africa are the largest contributors.

About MarketsandMarkets

MarketsandMarkets is a global market research and consulting company based in the U.S. We publish strategically analyzed market research reports and serve as a business intelligence partner to Fortune 500 companies across the world.

MarketsandMarkets also provides multi-client reports, company profiles, databases, and custom research services. They cover thirteen industry verticals, including advanced materials, automotives and transportation, banking and financial services, biotechnology, chemicals, consumer goods, energy and power, food and beverages, industrial automation, medical devices, pharmaceuticals, semiconductor and electronics, and telecommunications and IT.

We at MarketsandMarkets are inspired to help our clients grow by providing apt business insight with our huge market intelligence repository. To know more about us and our reports, please visit our website http://www.marketsandmarkets.com

Contact:

Mr. Rohan

7557 Rambler Road,

Suite 727, Dallas, TX 75231

Tel: +1-888-6006-441

Email: sales(at)marketsandmarkets(dot)com

http://www.marketsandmarkets.com

http://twitter.com/marketsmarkets







More Auto Transportation Services Press Releases

techreport.com – The Tech Report Podcast – MP3 Feed


techreport.com – The Tech Report Podcast – MP3 Feed

from The Tech Report Podcast – MP3 Feed

Price: USD 0
View Details about techreport.com

Global Holography for Industrial Applications Market to Reach US$16.7 Billion by 2017, According to New Report by Global Industry Analysts, Inc.

San Jose, California (PRWEB) March 15, 2012

Follow us on LinkedIn Tampering, counterfeiting, and theft are estimated to influence nearly 7.0% of international trade, equaling to more than $ 1.0 trillion in losses and is growing by 15% every year. The holography market is presently thriving, backed by the governments and industries efforts to curtail the widely prevalent issues of counterfeiting, tampering, theft, and piracy. For industrial purposes, holographic technology is also used in civilian and military aircrafts, which utilizes heads-up displays or holograms. The technology is utilized for quality control in production and fracture testing, such as holographic nondestructive testing. Holograms have been in use on Master and Visa cards, for more than 10 years now. The technology is now being adopted for specialized applications such as production of aircrafts and automobiles, television, telecommunications, computing and designing of assembly and scanning. Besides, holography is also venturing into niche areas, such as the generation of lifelike images of objects, solar weather forecasting, and 3D information storage and sound projections. Holographic elements, which are utilized in a range of industrial machines, results in the manufacture of less-expensive, smaller, and more effective machines.

The United States represents the largest regional market for industrial applications of holography worldwide, as stated by the new market research report on Holography for Industrial Applications. Europe and Japan are the other major Holography markets. Holographic Scanning represents the largest segment in the global holography market. Holographic testing constitutes the other larger segment, while Holographic Optical Elements is projected to register the fastest compounded annual growth rate of 9.5% during the analysis period.

Going forwards, the biggest potential for holography is predicted to be in medical, entertainment, and automotive markets. Automobile makers are currently assessing holography as a means of reducing 47% of the time needed to bring a model from a conception to the market launch stage. This is done through reduction of expensive, time-consuming formation of clay models for each design. The eye-catching appeal of holograms is propelling the usage of this technology across the advertising field. Holograms have higher viewer retention capabilities when compared to the other medium thus fueling the usage of the technology as an effective medium for displaying advertisements. Some of the leading companies across various sectors are using this technology to make a marked impact on audiences. For instance, McDonald used hologram based advertisement in the National Geographic’s centennial anniversary issue. Another example is Ford Motor that utilized the hologram technology to display a prototype of P200 car in 1999. With technological advancements, the appeal of holograph is expected to further increase in the advertisement landscape.

The holography market is characterized by the presence of several vertically integrated companies, and is led by private companies, mostly from the engineering, mass storage media, security, advertising, and medicine fields. Major players profiled in the report include 3D AG, AHEAD Optoelectronics, API Group Plc, CFC International Inc., Crown Roll Leaf Inc., CVI Melles Griot, De La Rue Holographics, DuPont Holographics Inc., GSI Group Inc., The Headwall Photonics Inc., Holographix LLC, Honeywell Scanning & Mobility, ITW Holographics, JDS Uniphase Corporation, JENOPTIK Microoptics Group, K Laser Technology Inc., Kaiser Optical Systems Inc., Light Impressions International Limited, Luminit LLC, OpSec Security Group Plc., Optaglio Limited, Optometrics LLC, Spatial Imaging Limited, Zebra Imaging Inc., among others.

The research report titled Holography for Industrial Applications: A Global Strategic Business Report announced by Global Industry Analysts Inc., provides a comprehensive review of the industrial holography markets, market outlook, the potential markets, key applications of holography, recent industry activity, recent product introductions, and profiles of major/niche global as well as regional market participants. The report provides annual sales estimates and projections for industrial holographic applications market for the years 2009 through 2017 for the following geographic markets – US, Canada, Japan, Europe, Asia-Pacific, Latin America and Rest of World. Key product segments analyzed include Holographic Scanning, Holographic Industrial Testing, Holographic Optical Elements and Others. Also, a six-year (2003-2008) historic analysis is provided for additional perspective.

For more details about this comprehensive market research report, please visit

http://www.strategyr.com/Holography_For_Industrial_Applications_Market_Report.asp

About Global Industry Analysts, Inc.

Global Industry Analysts, Inc., (GIA) is a leading publisher of off-the-shelf market research. Founded in 1987, the company currently employs over 800 people worldwide. Annually, GIA publishes more than 1300 full-scale research reports and analyzes 40,000+ market and technology trends while monitoring more than 126,000 Companies worldwide. Serving over 9500 clients in 27 countries, GIA is recognized today, as one of the world’s largest and reputed market research firms.

Follow us on LinkedIn

Global Industry Analysts, Inc.

Telephone: 408-528-9966

Fax: 408-528-9977

Email: press(at)StrategyR(dot)com

Web Site: http://www.StrategyR.com/